testing/do-tests

#!/bin/bash
# Automatically execute the strongSwan test cases
#
# Copyright (C) 2004  Eric Marchionni, Patrik Rayo
# Zuercher Hochschule Winterthur
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.

DIR=$(dirname `readlink -f $0`)
. $DIR/testing.conf
. $DIR/scripts/function.sh
SSHCONF="-F $DIR/ssh_config"

[ -d $DIR/hosts ] || die "Directory 'hosts' not found"
[ -d $DIR/tests ] || die "Directory 'tests' not found"
[ -d $BUILDDIR ] ||
	die "Directory '$BUILDDIR' does not exist, please run make-testing first"
running_any $STRONGSWANHOSTS || die "Please start test environment before running $0"

ln -sfT $DIR $TESTDIR/testing

##############################################################################
# take care of new path and file variables
#

[ -d $TESTRESULTSDIR ] || mkdir $TESTRESULTSDIR

TESTDATE=`date +%Y%m%d-%H%M-%S`

TODAYDIR=$TESTRESULTSDIR/$TESTDATE
mkdir $TODAYDIR
TESTRESULTSHTML=$TODAYDIR/all.html
INDEX=$TODAYDIR/index.html
DEFAULTTESTSDIR=$TESTDIR/testing/tests

GUEST_OUTPUT_DIR=/var/cache/testing-results
SOURCEIP_ROUTING_TABLE=220

export LEAK_DETECTIVE_LOG=/var/log/leak-detective.log

testnumber="0"
failed_cnt="0"
passed_cnt="0"
subdir_cnt="0"

##############################################################################
# parse arguments
#
function usage()
{
cat << EOF
Usage:
  ${0##*/} [-h] [-v|-t] [-i|-e] [TESTDIRS]
    --help              (-h)  show usage information
    --verbose           (-v)  show complete logs on errors (implies -t)
    --timestamps        (-t)  show timestamps in console.log
    --pre               (-i)  run pretest script only (single test only)
    --post              (-e)  run posttest script only (single test only)
    --no-leaks [daemon] (-n)  disable leak detective in commands (e.g. swanctl)
                              and optionally the daemon as well

    TESTDIRS  list of test directories (relative to testing/tests).
              wildcards (*) are supported. default is to run all tests.
EOF
}

TESTDIRS=()

while [ $# -gt 0 ]; do
	case $1 in
	-h|--help)
		usage
		exit
		;;
	-v|--verbose)
		verbose=YES
		timestamps=YES
		;;
	-t|--timestamps)
		timestamps=YES
		;;
	-i|--pre)
		pretest_only=YES
		;;
	-e|--post)
		posttest_only=YES
		;;
	-n|--no-leaks)
		export LEAK_DETECTIVE_DISABLE=1
		if [[ "$2" =~ d(aemon)? ]]; then
			export LEAK_DETECTIVE_DISABLE_DAEMON=1
			shift
		fi
		;;
	*)
		TESTDIRS+=("$1")
		;;
	esac

	shift
done

function print_time()
{
	[ "$timestamps" == "YES" ] && \
		logtime=$(date +"%s.%N") && \
		echo "$(date -d "0 +${logtime} sec -${teststart_ns} sec"  +%S.%N) [$(date -d @${logtime} +%T.%N)] ~ "
}

##############################################################################
# copy default tests to $BUILDDIR
#

TESTSDIR=$BUILDDIR/tests
[ -d $TESTSDIR ] || mkdir $TESTSDIR

##############################################################################
# assign IP for each host to hostname
#

for host in $STRONGSWANHOSTS
do
    eval ipv4_${host}="`echo $HOSTNAMEIPV4 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $1 }' | awk '{ print $1 }'`"
    eval ipv6_${host}="`echo $HOSTNAMEIPV6 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $1 }' | awk '{ print $1 }'`"

    case $host in
    moon)
        eval ipv4_moon1="`echo $HOSTNAMEIPV4 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $2 }' | awk '{ print $1 }'`"
        eval ipv6_moon1="`echo $HOSTNAMEIPV6 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $2 }' | awk '{ print $1 }'`"
        ;;
    sun)
        eval ipv4_sun1="`echo $HOSTNAMEIPV4 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $2 }' | awk '{ print $1 }'`"
        eval ipv6_sun1="`echo $HOSTNAMEIPV6 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $2 }' | awk '{ print $1 }'`"
        ;;
    alice)
        eval ipv4_alice1="`echo $HOSTNAMEIPV4 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $2 }' | awk '{ print $1 }'`"
        eval ipv6_alice1="`echo $HOSTNAMEIPV6 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $2 }' | awk '{ print $1 }'`"
        ;;
    venus)
        ;;
    bob)
        ;;
    carol)
        eval ipv4_carol1="`echo $HOSTNAMEIPV4 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $2 }' | awk '{ print $1 }'`"
        eval ipv6_carol1="`echo $HOSTNAMEIPV6 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $2 }' | awk '{ print $1 }'`"
         ;;
    dave)
        eval ipv4_dave1="`echo $HOSTNAMEIPV4 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $2 }' | awk '{ print $1 }'`"
        eval ipv6_dave1="`echo $HOSTNAMEIPV6 | sed -n -e "s/^.*${host},//gp" | awk -F, '{ print $2 }' | awk '{ print $1 }'`"
        ;;
    winnetou)
        ;;
    esac
done


##############################################################################
# open ssh sessions
#
for host in $STRONGSWANHOSTS
do
    ssh $SSHCONF -N root@`eval echo \\\$ipv4_$host` >/dev/null 2>&1 &
    eval ssh_pid_$host="`echo $!`"
    do_on_exit kill `eval echo \\\$ssh_pid_$host`
done

##############################################################################
# determine actual software versions
#

[ -f $SHAREDDIR/.strongswan-version ] && SWANVERSION=`cat $SHAREDDIR/.strongswan-version`
KERNELVERSION=`ssh $SSHCONF root@\$ipv4_winnetou uname -rv | cut -d ' ' -f 1,2 2>/dev/null`

##############################################################################
# create header for the results html file
#

ENVIRONMENT_HEADER=$(cat <<@EOF
  <table border="0" cellspacing="2" cellpadding="2">
    <tr valign="top">
      <td><b>Host</b></td>
      <td colspan="3">`uname -a`</td>
    </tr>
    <tr valign="top">
      <td><b>Guest kernel</b></td>
      <td colspan="3">$KERNELVERSION</td>
    </tr>
    <tr valign="top">
      <td><b>strongSwan</b></td>
      <td colspan="3">$SWANVERSION</td>
    </tr>
    <tr valign="top">
      <td><b>Date</b></td>
      <td colspan="3">$TESTDATE</td>
    </tr>
    <tr>
      <td width="100">&nbsp;</td>
      <td width="300">&nbsp;</td>
      <td width=" 80">&nbsp;</td>
      <td >&nbsp;</td>
    </tr>
@EOF
)

cat > $INDEX <<@EOF
<html>
<head>
  <title>strongSwan KVM Tests</title>
  <link rel="stylesheet" href="css/site.css">
</head>
<body>
  <h2>strongSwan KVM Tests</h2>
  $ENVIRONMENT_HEADER
@EOF

cat > $TESTRESULTSHTML <<@EOF
<html>
<head>
  <title>strongSwan KVM Tests - All Tests</title>
  <link rel="stylesheet" href="css/site.css">
</head>
<body>
  <div><a href="index.html">strongSwan KVM Tests</a> / All Tests</div>
  <h2>All Tests</h2>
  $ENVIRONMENT_HEADER
    <tr align="left">
      <th>Number</th>
      <th>Test</th>
      <th align="right">Time [s]</th>
      <th>Result</th>
    </tr>
@EOF

echo "Guest kernel : $KERNELVERSION"
echo "strongSwan   : $SWANVERSION"
echo "Date         : $TESTDATE"
echo

##############################################################################
# trap CTRL-C to properly terminate a long run
#

function abort_tests()
{
	echo -n "...aborting..." > /dev/tty
	aborted=YES
}
trap abort_tests INT

##############################################################################
# enter specific test directory
#
if [ "${#TESTDIRS[@]}" -gt 0 ]
then
    TESTS=$(printf "%s\n" "${TESTDIRS[@]}" | sort -u)
else
    TESTS=$(ls $DEFAULTTESTSDIR)
fi

for SUBDIR in $TESTS
do
    SUBTESTS="`basename $SUBDIR`"

	if [ $SUBTESTS = $SUBDIR ]
	then
		SUBTESTS="`ls $DEFAULTTESTSDIR/$SUBDIR`"
	else
		if [[ $SUBTESTS == *'*'* ]]
		then
			SUBTESTS="`basename -a $DEFAULTTESTSDIR/$SUBDIR`"
		fi
		SUBDIR="`dirname $SUBDIR`"
	fi

    if [ ! -d $TODAYDIR/$SUBDIR ]
    then
	mkdir $TODAYDIR/$SUBDIR
	if [ $testnumber == 0 ]
	then
	    FIRST="<b>Category</b>"
	else
	    FIRST="&nbsp;"
	fi

	if [ $subdir_cnt != 0 ]
	then
	    echo "      <td align=\"right\">$subdir_cnt</td>" >> $INDEX
	    echo "      <td>&nbsp;</td>" >> $INDEX
	    echo "    </tr>" >> $INDEX
	    subdir_cnt="0"
	fi
	echo "    <tr>" >> $INDEX
    echo "      <td>$FIRST</td>">> $INDEX
    echo "      <td><a href=\"$SUBDIR/index.html\">$SUBDIR</a></td>" >> $INDEX

	SUBTESTSINDEX=$TODAYDIR/$SUBDIR/index.html
	cat > $SUBTESTSINDEX <<@EOF
<html>
<head>
  <title>strongSwan $SUBDIR Tests</title>
  <link rel="stylesheet" href="../css/site.css">
</head>
<body>
  <div><a href="../index.html">strongSwan KVM Tests</a> / $SUBDIR</div>
  <h2>strongSwan $SUBDIR Tests</h2>
  <table border="0" cellspacing="2" cellpadding="2">
    <tr valign="top">
      <td><b>Guest kernel</b></td>
      <td colspan="3">$KERNELVERSION</td>
    </tr>
    <tr valign="top">
      <td><b>strongSwan</b></td>
      <td colspan="3">$SWANVERSION</td>
    </tr>
    <tr valign="top">
      <td><b>Date</b></td>
      <td colspan="3">$TESTDATE</td>
    </tr>
    <tr>
      <td width="100">&nbsp;</td>
      <td width="300">&nbsp;</td>
      <td width=" 50">&nbsp;</td>
      <td >&nbsp;</td>
    </tr>
    <tr align="left">
       <th>Number</th>
       <th>Test</th>
       <th colspan="2">Result</th>
    </tr>
@EOF
    fi

    for name in $SUBTESTS
    do
	let "testnumber += 1"
	let "subdir_cnt += 1"
	testname=$SUBDIR/$name
	log_action " $testnumber $testname:"

	teststart_ns=$(date +"%s.%N")
	teststart=$(date -d "@$teststart_ns" +"%s")

	if [ ! -d $DEFAULTTESTSDIR/${testname} ]
	then
	    echo "is missing..skipped"
	    continue
	fi

	[ ! -f $DEFAULTTESTSDIR/${testname}/description.txt ] && echo "!! File 'description.txt' is missing" && continue
	[ ! -f $DEFAULTTESTSDIR/${testname}/test.conf ]       && echo "!! File 'test.conf' is missing" && continue
	[ ! -f $DEFAULTTESTSDIR/${testname}/pretest.dat ]     && echo "!! File 'pretest.dat' is missing" && continue
	[ ! -f $DEFAULTTESTSDIR/${testname}/posttest.dat ]    && echo "!! File 'posttest.dat' is missing" && continue
	[ ! -f $DEFAULTTESTSDIR/${testname}/evaltest.dat ]    && echo "!! File 'evaltest.dat' is missing" && continue

	TESTRESULTDIR=$TODAYDIR/$testname
	mkdir -p $TESTRESULTDIR
	CONSOLE_LOG=$TESTRESULTDIR/console.log
	touch $CONSOLE_LOG

	TESTDIR=$TESTSDIR/${testname}

	unset RADIUSHOSTS
	unset DBHOSTS
	unset IPV6
	unset SWANCTL
	source $DEFAULTTESTSDIR/${testname}/test.conf

	DBDIR=/etc/db.d
	STATUS="passed"

	function stop_tcpdump
	{
		# wait for packets to get processed, but don't wait longer than 1s
		eval ssh $SSHCONF root@\$ipv4_${1} "\"i=100; while [ \\\$i -gt 0 ]; do pkill -USR1 tcpdump; tail -1 /tmp/tcpdump.err.log | perl -n -e '/(\\d+).*?(\\d+)/; exit (\\\$1 == \\\$2)' || break; sleep 0.01; i=\\\$((\\\$i-1)); done;\""
		echo "$(print_time)${1}# killall tcpdump" >> $CONSOLE_LOG
		eval ssh $SSHCONF root@\$ipv4_${1} "\"killall tcpdump; while true; do killall -q -0 tcpdump || break; sleep 0.01; done;\""
		eval TDUP_${1}="false"
		echo "" >> $CONSOLE_LOG
	}

############################################################################
# skip this whole pretest block if we only execute the posttest script
#
if [ "$posttest_only" == "YES" ]
then
	echo -n "(pre).."
else

	##########################################################################
	# copy test specific configurations to hosts and clear log files
	#

	$DIR/scripts/load-testconfig $testname

	##########################################################################
	# clean up and initialize test hosts
	#

	declare -A INIT_OPTIONS=()

	for host in $TCPDUMPHOSTS
	do
		# all hosts currently capture on eth0
		INIT_OPTIONS[${host}]="${INIT_OPTIONS[${host}]} -i eth0"
		eval TDUP_${host}="true"
	done

	for host in $DBHOSTS
	do
		INIT_OPTIONS[${host}]="${INIT_OPTIONS[${host}]} -d $DBDIR"
	done

	# initialize hosts in parallel
	WAIT_FOR=()

	for host in $STRONGSWANHOSTS
	do
		eval HOSTLOGIN=root@\$ipv4_${host}
		ssh $SSHCONF $HOSTLOGIN /usr/local/bin/init-test ${INIT_OPTIONS[${host}]} &
		WAIT_FOR+=($!)
	done

	wait ${WAIT_FOR[@]}

	##########################################################################
	# execute pre-test commands
	#

	echo -n "pre.."
	echo -e "PRE-TEST\n" >> $CONSOLE_LOG 2>&1

	eval `awk -F "::" '{
		if ($0 ~ /^#.*/)
		{
			printf("echo \"%s\"; ", $0);
		}
		else if ($2 != "")
		{
			printf("echo \"$(print_time)%s# %s\"; ", $1, $2)
			printf("ssh \044SSHCONF root@\044ipv4_%s \"%s\"; ", $1, $2)
			printf("echo;\n")
		}
	}' $TESTDIR/pretest.dat` >> $CONSOLE_LOG 2>&1

fi
############################################################################


############################################################################
# skip this whole test block if we only execute the pre- or posttest script
#
if [ "$pretest_only" == "YES" -o "$posttest_only" == "YES" ]
then
	echo -n "(test).."
else

	##########################################################################
	# get and evaluate test results
	#

	echo -n "test.."
	echo -e "\nTEST\n" >> $CONSOLE_LOG 2>&1

	eval `awk -F "::" '{
		host=$1
		command=$2
		pattern=$3
		hit=$4
		if ($0 ~ /^#.*/)
		{
			printf("echo \"%s\"; ", $0);
			next
		}
		else if (command == "")
		{
			next
		}
		printf("cmd_err=\044(mktemp --suff .err test.XXXXXX); ")
		printf("cmd_out=\044(mktemp --suff .out test.XXXXXX); ")
		printf("start_time=\044(print_time); ")
		if (command == "tcpdump")
		{
			printf("if [ \044TDUP_%s == \"true\" ]; then stop_tcpdump %s; fi; \n", host, host)
			printf("ssh \044SSHCONF root@\044ipv4_%s cat /tmp/tcpdump.log > \044cmd_out; ", host)
		}
		else
		{
			printf("ssh \044SSHCONF root@\044ipv4_%s %s >\044cmd_out 2>\044cmd_err; ",  host, command)
		}
		printf("cmd_res=\044(cat \044cmd_out | grep \"%s\"); ", pattern)
		printf("cmd_exit=\044?; ")
		printf("cmd_fail=0; ")
		if (hit ~ /^[0-9]+$/)
		{
			printf("if [ \044(echo \"\044cmd_res\" | wc -l) -ne %d ] ", hit)
		}
		else
		{
			printf("if [ \044cmd_exit -eq 0 -a \"%s\" = \"NO\"  ] ", hit)
			printf("|| [ \044cmd_exit -ne 0 -a \"%s\" = \"YES\" ] ", hit)
		}
		printf("; then STATUS=\"failed\"; cmd_fail=1; fi; \n")

		printf("if [ \044cmd_fail -ne 0 ]; then echo \"~~~~~~~ FAIL ~~~~~~~\"; fi; \n")
		if (command == "tcpdump")
		{
			printf("echo \"\044{start_time}%s# cat /tmp/tcpdump.log | grep \047%s\047  [%s]\"; ", host, pattern, hit)
		}
		else
		{
			printf("echo \"\044{start_time}%s# %s | grep \047%s\047  [%s]\"; ", host, command, pattern, hit)
		}
		printf("if [ -n \"\044cmd_res\" ]; then echo \"\044cmd_res\"; fi; \n")
		printf("cat \044cmd_err; \n")
		printf("if [ \044cmd_fail -ne 0 ]; then \n")
		printf("if [ -s \044cmd_out ]; then echo \"~~ output ~~~~~~~~~~\"; \n")
		printf("if [ \"\044verbose\" == \"YES\" ]; then cat \044cmd_out;\n")
		printf("else cat \044cmd_out | head; fi; fi; \n")
		printf("echo \"~~~~~~~~~~~~~~~~~~~~\"; fi; \n")
		printf("rm -f -- \044cmd_out \044cmd_err; \n")
		printf("echo; ")
	}' $TESTDIR/evaltest.dat` >> $CONSOLE_LOG 2>&1


	##########################################################################
	# collect test results from hosts
	#

	COLLECT_OPTIONS_BASE="-t $SOURCEIP_ROUTING_TABLE"

	if [ $name = "net2net-ip4-in-ip6-ikev2" -o $name = "net2net-ip6-in-ip4-ikev2" ]
	then
		COLLECT_OPTIONS_BASE="$COLLECT_OPTIONS_BASE -4 -6"
		IPROUTE_DSP="ip (-6) route list table $SOURCEIP_ROUTING_TABLE"
		IPTABLES_DSP="iptables -L ; ip6tables -L"
		IPTABLES_SAVE_DSP="iptables-save ; ip6tables-save"
	elif [ -n "$IPV6" ]
	then
		COLLECT_OPTIONS_BASE="$COLLECT_OPTIONS_BASE -6"
		IPROUTE_DSP="ip -6 route list table $SOURCEIP_ROUTING_TABLE"
		IPTABLES_DSP="ip6tables -L"
		IPTABLES_SAVE_DSP="ip6tables-save"
	else
		COLLECT_OPTIONS_BASE="$COLLECT_OPTIONS_BASE -4"
		IPROUTE_DSP="ip route list table $SOURCEIP_ROUTING_TABLE"
		IPTABLES_DSP="iptables -L"
		IPTABLES_SAVE_DSP="iptables-save"
	fi

	declare -A COLLECT_OPTIONS=()

	for host in $IPSECHOSTS
	do
		COLLECT_OPTIONS[${host}]="${COLLECT_OPTIONS[${host}]} -i"
		if [ -z "$SWANCTL" ]
		then
			COLLECT_OPTIONS[${host}]="${COLLECT_OPTIONS[${host}]} -l"
		fi
	done

	for host in $DBHOSTS
	do
		COLLECT_OPTIONS[${host}]="${COLLECT_OPTIONS[${host}]} -d"
	done

	for host in $RADIUSHOSTS
	do
		COLLECT_OPTIONS[${host}]="${COLLECT_OPTIONS[${host}]} -r"
	done

	# collect test results in parallel, copy them afterwards
	WAIT_FOR=()

	for host in ${!COLLECT_OPTIONS[@]}
	do
		eval HOSTLOGIN=root@\$ipv4_${host}
		ssh $SSHCONF $HOSTLOGIN /usr/local/bin/collect-results \
			$COLLECT_OPTIONS_BASE ${COLLECT_OPTIONS[${host}]} ${GUEST_OUTPUT_DIR} &
		WAIT_FOR+=($!)
	done

	test ${#WAIT_FOR[@]} -gt 0 && wait ${WAIT_FOR[@]}

	WAIT_FOR=()

	for host in ${!COLLECT_OPTIONS[@]}
	do
		eval HOSTLOGIN=root@\$ipv4_${host}
		ssh $SSHCONF $HOSTLOGIN "tar -cf - -C ${GUEST_OUTPUT_DIR} ." | tar -xf - -C $TESTRESULTDIR/ &
		WAIT_FOR+=($!)
	done

	test ${#WAIT_FOR[@]} -gt 0 && wait ${WAIT_FOR[@]}

	chmod a+r $TESTRESULTDIR/*

	##########################################################################
	# create index.html for the given test case
	#

	cat > $TESTRESULTDIR/index.html <<@EOF
<html>
<head>
  <title>Test $testname</title>
  <link rel="stylesheet" href="../../css/site.css">
</head>
<body>
<table border="0" cellpadding="0" cellspacing="0" width="600">
  <tr><td>
    <div><a href="../../index.html">strongSwan KVM Tests</a> / <a href="../index.html">$SUBDIR</a> / $name</div>
    <h2>Test $testname</h2>
    <h3>Description</h3>
@EOF

	cat $TESTDIR/description.txt >> $TESTRESULTDIR/index.html

	cat >> $TESTRESULTDIR/index.html <<@EOF
    <ul>
      <li><a href="console.log">console.log</a></li>
    </ul>
    <img src="../../images/$DIAGRAM" alt="$VIRTHOSTS">
@EOF

	for host in $IPSECHOSTS
	do
	    if [ -n "$SWANCTL" ]
		then
			echo >> $TESTRESULTDIR/${host}.swanctl.sas
			cat $TESTRESULTDIR/${host}.swanctl.pols >> \
				$TESTRESULTDIR/${host}.swanctl.sas
			cat $TESTRESULTDIR/${host}.swanctl.algs >> \
				$TESTRESULTDIR/${host}.swanctl.stats

		    cat >> $TESTRESULTDIR/index.html <<@EOF
    <h3>$host</h3>
      <table border="0" cellspacing="0" width="600">
      <tr>
	<td valign="top">
	  <ul>
	    <li><a href="$host.swanctl.conf">swanctl.conf</a></li>
	    <li><a href="$host.swanctl.conns">swanctl --list-conns</a></li>
	    <li><a href="$host.swanctl.certs">swanctl --list-certs</a></li>
	    <li><a href="$host.strongswan.conf">strongswan.conf</a></li>
	    <li><a href="$host.ipsec.sql">ipsec.sql</a></li>
	  </ul>
	</td>
	<td valign="top">
	  <ul>
	    <li><a href="$host.swanctl.sas">swanctl --list-sas|--list-pols</a></li>
	    <li><a href="$host.swanctl.pools">swanctl --list-pools</a></li>
	    <li><a href="$host.swanctl.authorities">swanctl --list-authorities</a></li>
	    <li><a href="$host.swanctl.stats">swanctl --stats|--list-algs</a></li>
	    <li><a href="$host.auth.log">auth.log</a></li>
	    <li><a href="$host.daemon.log">daemon.log</a></li>
	  </ul>
      </td>
	<td valign="top">
	  <ul>
	    <li><a href="$host.ip.policy">ip -s xfrm policy</a></li>
	    <li><a href="$host.ip.state">ip -s xfrm state</a></li>
	    <li><a href="$host.ip.route">$IPROUTE_DSP</a></li>
	    <li><a href="$host.iptables">$IPTABLES_DSP</a></li>
	    <li><a href="$host.iptables-save">$IPTABLES_SAVE_DSP</a></li>
	  </ul>
	  &nbsp;
      </td>
    </tr>
    </table>
@EOF

		else
		    cat >> $TESTRESULTDIR/index.html <<@EOF
    <h3>$host</h3>
      <table border="0" cellspacing="0" width="600">
      <tr>
	<td valign="top">
	  <ul>
	    <li><a href="$host.ipsec.conf">ipsec.conf</a></li>
	    <li><a href="$host.ipsec.secrets">ipsec.secrets</a></li>
	    <li><a href="$host.ipsec.sql">ipsec.sql</a></li>
	    <li><a href="$host.strongswan.conf">strongswan.conf</a></li>
	  </ul>
	</td>
	<td valign="top">
	  <ul>
	    <li><a href="$host.statusall">ipsec statusall</a></li>
	    <li><a href="$host.listall">ipsec listall</a></li>
	    <li><a href="$host.auth.log">auth.log</a></li>
	    <li><a href="$host.daemon.log">daemon.log</a></li>
	  </ul>
      </td>
	<td valign="top">
	  <ul>
	    <li><a href="$host.ip.policy">ip -s xfrm policy</a></li>
	    <li><a href="$host.ip.state">ip -s xfrm state</a></li>
	    <li><a href="$host.ip.route">$IPROUTE_DSP</a></li>
	    <li><a href="$host.iptables">$IPTABLES_DSP</a></li>
	    <li><a href="$host.iptables-save">$IPTABLES_SAVE_DSP</a></li>
	  </ul>
      </td>
    </tr>
    </table>
@EOF
		fi
	done

	for host in $RADIUSHOSTS
	do
	    cat >> $TESTRESULTDIR/index.html <<@EOF
    <h3>$host</h3>
      <table border="0" cellspacing="0" width="600">
      <tr>
	<td valign="top">
	  <ul>
	    <li><a href="$host.clients.conf">clients.conf</a></li>
	    <li><a href="$host.radiusd.conf">radiusd.conf</a></li>
	    <li><a href="$host.eap">eap</a></li>
	  </ul>
	</td>
	<td valign="top">
	  <ul>
	    <li><a href="$host.default">sites-enabled/default</a></li>
	    <li><a href="$host.inner-tunnel">sites-enabled/inner-tunnel</a></li>
	    <li><a href="$host.radius.log">radius.log</a></li>
	  </ul>
      </td>
	<td valign="top">
	  <ul>
	    <li><a href="$host.proxy.conf">proxy.conf</a></li>
	    <li><a href="$host.users">users</a></li>
	  </ul>
      </td>
    </tr>
    </table>
@EOF

	done

	cat >> $TESTRESULTDIR/index.html <<@EOF
	<h3>tcpdump</h3>
	<ul>
@EOF

	for host in $TCPDUMPHOSTS
	do
	    cat >> $TESTRESULTDIR/index.html <<@EOF
	    <li><a href="$host.tcpdump.log">$host tcpdump.log</a></li>
@EOF
	done

	cat >> $TESTRESULTDIR/index.html <<@EOF
	</ul>
@EOF

	cat >> $TESTRESULTDIR/index.html <<@EOF
  </td></tr>
</table>
</body>
</html>
@EOF

fi
############################################################################


############################################################################
# skip this whole posttest block if we only execute the pretest script
#
if [ "$pretest_only" == "YES" ]
then
	echo -n "(post)"
else

	##########################################################################
	# execute post-test commands
	#

	echo -n "post"
	echo -e "\nPOST-TEST\n" >> $CONSOLE_LOG 2>&1

	eval `awk -F "::" '{
		if ($0 ~ /^#.*/)
		{
			printf("echo \"%s\"; ", $0);
		}
		else if ($2 != "")
		{
			printf("echo \"$(print_time)%s# %s\"; ", $1, $2)
			printf("ssh \044SSHCONF root@\044ipv4_%s \"%s\"; ", $1, $2)
			printf("echo;\n")
		}
	}' $TESTDIR/posttest.dat` >> $CONSOLE_LOG 2>&1

	##########################################################################
	# check that IPsec state was cleaned up properly
	#

	for host in $IPSECHOSTS
	do
		eval HOSTLOGIN=root@\$ipv4_${host}
		IPSECSTATE=`ssh $SSHCONF $HOSTLOGIN 'ip xfrm state'`
		# ignore IPv4/v6 states created with IPComp SAs
		IPSECSTATEISSUE=`echo "$IPSECSTATE" | grep 'proto.*spi' | grep -v 'proto 4'`
		IPSECPOLICY=`ssh $SSHCONF $HOSTLOGIN 'ip xfrm policy'`
		if [ -n "$IPSECSTATEISSUE" -o -n "$IPSECPOLICY" ]
		then
			echo -e "\n$host# ip xfrm state [NO]" >> $CONSOLE_LOG
			echo "$IPSECSTATE" >> $CONSOLE_LOG
			echo -e "\n$host# ip xfrm policy [NO]" >> $CONSOLE_LOG
			echo "$IPSECPOLICY" >> $CONSOLE_LOG
			STATUS="failed"
		fi
	done


	##########################################################################
	# make sure there were no leaks
	#

	for host in $STRONGSWANHOSTS
	do
		eval HOSTLOGIN=root@\$ipv4_${host}
		LEAKS=`ssh $SSHCONF $HOSTLOGIN 'cat $LEAK_DETECTIVE_LOG 2>/dev/null | grep -v "No leaks detected.*"'`
		if [ -n "$LEAKS" ]
		then
			echo -e "\n$host# cat $LEAK_DETECTIVE_LOG [NO]" >> $CONSOLE_LOG
			echo "$LEAKS" >> $CONSOLE_LOG
			echo "<<< $host $LEAK_DETECTIVE_LOG >>>" >> $CONSOLE_LOG
			STATUS="failed"
		fi
	done


	##########################################################################
	# get a copy of /var/log/auth.log
	#

	for host in $IPSECHOSTS
	do
	    eval HOSTLOGIN=root@\$ipv4_${host}
	    ssh $SSHCONF $HOSTLOGIN "grep -s -E 'charon|last message repeated|imcv|pt-tls-client' \
		/var/log/auth.log" >> $TESTRESULTDIR/${host}.auth.log
	done


	##########################################################################
	# get a copy of /var/log/daemon.log
	#

	for host in $IPSECHOSTS
	do
	    eval HOSTLOGIN=root@\$ipv4_${host}
	    ssh $SSHCONF $HOSTLOGIN "grep -s -E 'systemd|swanctl|charon|last message repeated|imcv' \
		/var/log/daemon.log" >> $TESTRESULTDIR/${host}.daemon.log
	done


	##########################################################################
	# stop tcpdump if necessary
	#

	for host in $TCPDUMPHOSTS
	do
	    if [ "`eval echo \\\$TDUP_${host}`" = "true" ]
	    then
			stop_tcpdump $host
	    fi
	    eval HOSTLOGIN=root@\$ipv4_${host}
		scp $SSHCONF $HOSTLOGIN:/tmp/tcpdump.log \
			$TESTRESULTDIR/${host}.tcpdump.log > /dev/null 2>&1
	done

	##########################################################################
	# remove database directory if needed
	#

	for host in $DBHOSTS
	do
		eval HOSTLOGIN=root@\$ipv4_${host}
	    ssh $SSHCONF $HOSTLOGIN "umount $DBDIR; rm -r $DBDIR" > /dev/null 2>&1
	done

	##########################################################################
	# copy default host config back if necessary
	#

	$DIR/scripts/restore-defaults $testname

	##########################################################################
	# remove any charon.pid files that still may exist
	#

	for host in $IPSECHOSTS
	do
	    eval HOSTLOGIN=root@\$ipv4_${host}
	    ssh $SSHCONF $HOSTLOGIN 'if [ -f /var/run/charon.pid ]; then rm /var/run/charon.pid; echo "    removed charon.pid on `hostname`"; fi'
	done

fi
############################################################################


	##########################################################################
	# set counters
	#

	if [ $STATUS = "failed" ]
	then
	    let "failed_cnt += 1"
	else
	    let "passed_cnt += 1"
	fi


	##########################################################################
	# write test status to html file
	#
	testend=$(date +%s)
	let "testend -= teststart"
	let "timetotal += testend"

	if [ $STATUS = "passed" ]
	then
		COLOR="green"
		log_status 0
	else
		COLOR="red"
		log_status 1
	fi

	cat >> $TESTRESULTSHTML << @EOF
  <tr>
    <td>$testnumber</td>
    <td><a href="$testname/index.html">$testname</a></td>
    <td align="right">$testend</td>
    <td><a href="$testname/console.log"><font color="$COLOR">$STATUS</font></a></td>
  </tr>
@EOF
	cat >> $SUBTESTSINDEX << @EOF
  <tr>
    <td>$testnumber</td>
    <td><a href="$name/index.html">$name</a></td>
    <td><a href="$name/console.log"><font color="$COLOR">$STATUS</font></a></td>
    <td>&nbsp;</td>
  </tr>
@EOF

	##########################################################################
	# exit if aborted or running only pre-/posttest scripts
	#
	if [ -n "$aborted" -o "$pretest_only" == "YES" -o "$posttest_only" == "YES" ]
	then
	    break 2
	fi

    done

done


##############################################################################
# finish the results html file
#

printf -v timetotal_fmt '%02d:%02d:%02d' $((timetotal/3600)) $((timetotal%3600/60)) $((timetotal%60))

cat >> $TESTRESULTSHTML << @EOF
    <tr>
      <td>&nbsp;</td><td>&nbsp;</td><td>&nbsp;</td><td>&nbsp;</td>
    </tr>
    <tr>
      <td><b>Passed</b></td><td><b><font color="green">$passed_cnt</font></b></td><td>&nbsp;</td><td>&nbsp;</td>
    </tr>
    <tr>
      <td><b>Failed</b></td><td><b><font color="red">$failed_cnt</font></b></td><td>&nbsp;</td><td>&nbsp;</td>
    </tr>
    <tr>
      <td><b>Time</b></td><td><b><font color="blue">$timetotal_fmt (${timetotal}s)</font></b></td><td>&nbsp;</td><td>&nbsp;</td>
    </tr>
  </table>
</body>
</html>
@EOF

if [ $subdir_cnt != 0 ]
then
cat >> $INDEX << @EOF
      <td align="right">$subdir_cnt</td>
      <td>&nbsp;</td>
    </tr>
@EOF
fi

let "all_cnt = $passed_cnt + $failed_cnt"

cat >> $INDEX << @EOF
    <tr>
      <td>&nbsp;</td>
      <td><a href="all.html"><b>all</b></a></td>
      <td align="right"><b>$all_cnt</b></td>
      <td>&nbsp;</td>
    </tr>
    <tr>
      <td><b>Failed</b></td>
      <td>&nbsp;</td>
      <td align="right"><b><font color="red">$failed_cnt</font></b></td>
      <td>&nbsp;</td>
    </tr>
  </table>
</body>
</html>
@EOF

echo
echo_ok     "Passed : $passed_cnt"
echo_failed "Failed : $failed_cnt"

echo
echo "The results are available in $TODAYDIR"
echo "or via the link http://$ipv4_winnetou/testresults/$TESTDATE"

ENDDATE=`date +%Y%m%d-%H%M-%S`
echo
echo "Finished : $ENDDATE ($timetotal_fmt)"